China Wireless Repeater Technical Expert!
You are here:  Home > Products > Narrow Band Repeater > Single system >
Click to Enlarge
TICN10
TICN10 single system
10dBm-17dBm output power, 65dB gain
100-1000sqm coverage

Description:

TICN10 series Mini Repeater Band Selective offer not only elegant design of closet, but also contribute outstanding performance for indoor coverage solution. It amplifies signals between a mobile and a BTS for indoor applications where are located in shadowing areas blocked by obstructions or impediments. The TICN10 Band Selective Repeaters provide a perfect solution to satisfy operators’ demands for variable band selection of GSM, DCS, CDMA, 3G or LTE systems, it also support various bandwidths simultaneously. Band selective with Out of Band Gain function will simply enable less noise or suppress interference from operator’s frequency band. System status is clearly visible by LED indications. Repeater configuration and alarm are able to be forwarded to control center for technicians monitoring. The light weight and compact size makes TICN10 repeater ideal for easily installation with little space.


Features:

1.Antenna isolation testing                 2.Automatic gain control 

 3.Intelligent mode setting                  4.Uplink sleep mode (Optional)  

 5.Auto shut off if severe oscillation   6.Cost-effective for practical solutions  

 7.Low interference                               8.Signal Strength shown on appearance

Specification:

Electrical Specification Uplink Downlink

Frequency Range

824-849MHz   
890-915MHz
1920-1980MHz

869-894MHz   
935-960MHz
2110-21700MHz

Bandwidth

various bandwidth is available upon request

Maximum Gain

≧65dB

Auto Gain Control(AGC)

≧25dB

Auto Gain Setup Range(Inside)

31dB/1dB step

Gain Flatness

≦3dB(P-P)

Output Power 

10-17dBm

10-17dBm

Out of Band Gain

±400KHz

< 50dB

±600KHz

< 40dB

±1MHz

< 35dB

±5MHz

< 25dB

Inter-modulation Products

9KHz~1GHz

≦ -36dBm

1GHz~12.75GHz

≦ -30dBm

Spurious Emission

9KHz~1GHz

≦ -36dBm

1GHz~12.75GHz

≦ -30dBm

Noise Figure

≦ 6dB

VSWR

≦1.5

Group Delay

≦ 4.5μs

Power Consumption

≦ 15W

Power Supply

DC 4A/9V

Mechanical specification

Dimension

186*122*65mm

Impedance

50 Ω (nominal)

Weight

≦1.5Kg

I/O Connector

N-female

Environmental specification

IP Rating

IP30

Operating Temperature

-10℃~50℃

Monitoring specification    

LED indication

Power

DC ON/OFF

AGC

ALC1~5dB, Red

ISO Red, Antenna isolation is lower than installation request; The gain will be adjusted automatically by repeater for proper mounting.





Keywords: wireless repeater wireless repeater